Accessories (cables, connectors, fastening materials, etc.)

Schuko plug IP54 made of solid rubber for quick and safe installation - complete protection against contact - Protection against splashing water

Read more less

Wieland RST20i3 distribution block 3-pole, application 250V with PE, 20A, for coupling up to three inverters at 3 inputs and 1 output to the house line, with mounting option, coding color black, housing color black In the following article you will find information on connecting several balcony power plants and using the Wieland distribution block Scope of delivery: distribution block Closing cap for inputs that may not be required Possible setup: 2 Wieland plugs (inputs from the inverter to the distribution block) distribution block 1 Wieland socket part (output to house line) Complementary products: Wieland device connection Wieland angle plug Wieland power socket Wieland socket part Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants 96.030.0153.1 Z5.564.4553.1

Read more less

For mounting roof hooks and feet in wood Quick installation without pre-drilling in rafters and wooden beams. High pressure force thanks to the large contact surface and good power transmission thanks to the Torx40 drive. scope of delivery Washer head screw M8 x 80

Read more less

Original MC4 plug or socket including metal inlay for producing solar cables 4mm² - 6mm² Solar modules are connected with solar cables. These in turn are connected using MC4 connectors with clear advantages. Firm connection of solar module cable and extension Protection against water, light, cold & heat Contact protection Usually the metal inlays are crimped with the cable to create a firm connection. Alternatively, the metal piece can also be soldered. The polarity would also be important, as this is assigned exactly the opposite way with MC4 plugs than at first glance. The square plastic plug is the male plug. The plug with a pin in the middle is the female plug. The cause here is the metal parts and you can see that the metal part of the pin plug is larger than the metal part of the square plastic plug. Packaging Unit: 1 piece

Read more less

Description: Hanger screws are perfect for waterproof installation on roofs with a wooden substructure, as well as stone or concrete roofs. Hanger screws can also be easily used on facades. The hanger bolt has a wood or dowel thread on one side and a metal thread on the other side. The extra-long metal thread offers enough flexibility for height adjustment. Installation is carried out using a standard screwdriver and hexagonal key attachment. Here is the appropriate assembly video. scope of delivery 1 x hanger bolt M10, 200mm 1 x Rubber Seal 3 x nuts with locking teeth 1 x adapter plate for connecting hanger screw and profile Further material for complete assembly profile rail End Clamps & Middle Clamps Profile connector End caps

Read more less

Description: A mounting set consists of small feet and larger feet. Ideal for mounting on a flat roof, or on the facade, your module is aligned at an angle of inclination of 10°. The “Standing Feet” mounting set is particularly suitable for users for whom aesthetics and simplicity on the roof or on the wall are very important. Due to the low height of the feet, your solar plant can hardly be seen on a carport, for example. Click here for the assembly video Assembly: Two small feet and two larger feet are required to attach a module. For example, to attach two modules in a row, three small and three larger feet are required. Additional required fastening material in the form of washer head screws, module end clamps and middle clamps are part of the offer. To ensure safe installation, the assembly must be weighed down or firmly anchored. The feet can be ideally connected to concrete curbs or directly to the rafters of the roof. Further information can be found in the assembly instructions Material: aluminum Color: silver Dimensions: Mounting foot 1: width 70 mm / height: 220 mm, Mounting foot 2: Width: 70 mm / Height: 60 mm Module relocation: across a floor or wall

Read more less

Description: Wieland surface-mounted socket for the system socket. The surface-mounted box, suitable for the Wieland socket frame. Surface-mounted box RST 20/25 Article no. 99.404.9999.7 Click here for the manufacturer's description and assembly instructions scope of delivery 1 x surface-mounted box Matching: mounting frame & socket

Read more less

The standard-compliant connection for mini PV and balcony power plants. In addition to the Wieland feed-in socket, a standard-compliant connection can also be ensured by permanently installing it on your house connection. For example, fixed installation via luster terminals or installation terminals is suitable for this. Alternatively, the Spelsberg surface-mounted box can also be equipped with the Wieland socket part scope of delivery 1 x surface-mounted frame with cover IP54 Complementary products: Wieland socket Schuko plug Wieland plug Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

Cylinder head screw M8 with hexagon socket according to Din912 The M8 cylinder head screws made of A2 stainless steel are used to fasten end clamps and middle clamps. Certified according to DIN 912, the screw is used in the construction industry, but also in mechanical and plant engineering. In the solar industry, the screw is primarily used to fasten modules with end and middle clamps. In combination with a lock washer and a sliding block, clamps are firmly connected to solar modules and profile rails. Which screw length do I need for which solar module / frame height? 35mm screw length -> 30mm end clamp / module height 40mm screw length -> 35mm & 38mm end clamp / module height scope of delivery - M8 cylinder head screw

Read more less

Description The trapezoidal sheet metal mounting base is ideal for watertight installation on the raised beads of trapezoidal sheet metal roofs. A solar module is installed directly on the trapezoidal sheet metal bridge. Optionally, adapter feet can be inserted into the rail and an additional inclination of 5 or 7 degrees is achieved. By clamping on the long side of the module frame, the module maintains the best possible load capacity. Thanks to thread-cutting screws, fastening takes place without pre-drilling. Screws and already glued EPDM seal prevent moisture from penetrating. The modules can be attached horizontally or vertically directly to the mounting rails or adapter feet using module clamps. scope of delivery 1 x mounting rail 40cm Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less

Hoymiles Gateway DTU-WLite-S is a data transmission unit that collects the information and data of the microinverter using 2.4G wireless communication and transmits it to Hoymiles monitoring system, S-miles Cloud, using Wi-Fi technology. sends. With the monitoring of up to 4 solar modules, DTU-WLite is specially designed for small PV systems. Users can easily read the module-level data and alarms, realize remote operation and maintenance of the microinverter system at any time and anywhere in the S-miles cloud. User manual Hoymiles dtu-Wlite Product features: Module level monitoring with up to 4 solar panels Plug and play, easy installation Real-time microinverter data and alarm on S-Miles toolkit Remote system management on S-Miles Cloud Technical data: Microinverter Compatibility: HMS Series Type: 2.4GHz Proprietary RF (Nordic) Built-in WiFi: 802.11b/g/n Power supply: 5V/2A Maximum distance (outdoor area): 150 m Limitation of solar panel monitoring data: 4 Connection: USB Power consumption: Typical 1.0 W / Max. 5.0 W Ambient temperature: -20° to 55°C Dimensions: 143 x 33 x 12.5mm Weight: 0.1kg

Read more less