””

Code "Spring" - Save 25€ on all balcony power plants - only for a short time!!

Installation set for trapezoidal sheet metal

Description

Description

The trapezoidal sheet metal installation set is ideal for waterproof installation on the raised beads of trapezoidal sheet metal roofs. With the Trapezoidal Sheet Plus mounting set you have the option of mounting your modules both horizontally and vertically.

The adapter rails allow you to raise your modules by up to 7 degrees and thus generate electricity more effectively.

By clamping on the long side of the frame, the module maintains the best possible load capacity. Thanks to special sheet metal screws, fastening takes place without pre-drilling. Screws and already glued EPDM sealing rings prevent moisture from penetrating. The module is mounted directly on the mounting rails or with additional mounting adapters using module clamps.

Click here for the data sheet and assembly instructions

Fastening set for trapezoidal sheet metal (1 module)

  • 4 x mounting rails (10cm) including seal
  • 2 x front adapters
  • 2 x rear adapters
  • 4 x end clamps including screws for module attachment
  • 4 x Rhombus Nuts
  • 16 x Sheet Metal Screws


Fastening set for trapezoidal sheet metal (2 modules)

  • 6 x mounting rails (10cm) including seal
  • 3 x front adapters
  • 3 x rear adapters
  • 4 x end clamps including screws for module attachment
  • 2 x Middle Clamps
  • 6 x Rhombus Nuts
  • 24 x Sheet Metal Screws

Complementary products:


A mounting set contains all screws, washers, etc. for attaching one or two modules. If necessary, slightly different systems are used.

Search terms: mounting set trapezoidal sheet metal


Installation set for trapezoidal sheet metal

Product form

Free pickup in our shop(s)

€49,95 Incl. VAT

Description

Description

The trapezoidal sheet metal installation set is ideal for waterproof installation on the raised beads of trapezoidal sheet metal roofs. With the Trapezoidal Sheet Plus mounting set you have the option of mounting your modules both horizontally and vertically.

The adapter rails allow you to raise your modules by up to 7 degrees and thus generate electricity more effectively.

By clamping on the long side of the frame, the module maintains the best possible load capacity. Thanks to special sheet metal screws, fastening takes place without pre-drilling. Screws and already glued EPDM sealing rings prevent moisture from penetrating. The module is mounted directly on the mounting rails or with additional mounting adapters using module clamps.

Click here for the data sheet and assembly instructions

Fastening set for trapezoidal sheet metal (1 module)

  • 4 x mounting rails (10cm) including seal
  • 2 x front adapters
  • 2 x rear adapters
  • 4 x end clamps including screws for module attachment
  • 4 x Rhombus Nuts
  • 16 x Sheet Metal Screws


Fastening set for trapezoidal sheet metal (2 modules)

  • 6 x mounting rails (10cm) including seal
  • 3 x front adapters
  • 3 x rear adapters
  • 4 x end clamps including screws for module attachment
  • 2 x Middle Clamps
  • 6 x Rhombus Nuts
  • 24 x Sheet Metal Screws

Complementary products:


A mounting set contains all screws, washers, etc. for attaching one or two modules. If necessary, slightly different systems are used.

Search terms: mounting set trapezoidal sheet metal


Customer Reviews

Based on 6 reviews
67%
(4)
17%
(1)
17%
(1)
0%
(0)
0%
(0)
J
Jan K.
Halterung PV Anlage Trapezblech

Alles gut, immer wieder.

P
Philipp H.
Die beste Halterung für Trapezblech

Die Halter sind sehr gut verarbeitet.
Die Lieferung ging sehr schnell von statten.
Einziges Wermutstropfen, 4 von 6 PV Halter ( die äußeren) wurden für 35er Paneele geliefert ( für 30er bestellt) .
Wären die richtigen Halter geliefert worden gäbe es 5 Sterne! So nur 3 ...

q
quasipapa
Top Halterung für Trapezblech

Mit dem Montageset wurden zwei Solarpanels auf einem Gartenhaus (von Biohort) mit Trapezblech-Dach montiert.
Das Set wurde innerhalb von 3 Arbeitstagen geliefert. Es war alles dabei, um zwei Solarpanels zu befestigen. Die Montage war schnell erledigt: Montagefüße (die sind 40 cm lang) auf dem Dach positionieren, mit jeweils 4 (beiliegenden) selbstschneidenden Blechschrauben festschrauben, Fußadapter einschieben, Panels auflegen und mit den Klemmen befestigen.
Nach den ersten Regenschauern sieht auch alles dicht aus, durch die Befestigung kommt kein Wasser ins Gartenhaus. Die Halterungen sind stabil und wir sparen uns den zusätzlichen Balast gegenüber dern Alternativen mit Befestigung ohne Schrauben.
Mit den 7 Grad zusätzlich kommen wir auf ca. 11 Grad Neigung. Noch immer nicht ideal, aber besser als bei direkter Montage auf dem Dach. Vorteil bei Gegenden mit teilweise stärkerem Wind: Weniger Angriffsfläche und damit auch weniger Windkräfte.
Fazit: Klare Empfehlung für alle, die eine ähnliche Montagesituation vorfinden.

U
Uwe V.
Super Wsre

Netter Kontakt,schnelle Lieferung. Sehr wertig!!!

R
Rene
Einfach perfekt!

Sehr schnelle Lieferung. Alles super.

Login

Forgot your password?

Don't have an account yet?
Create account